Alternating Current Field Measurement Technique ACFMT
What you’ll learn
Students will learn the fundamentals of alternating current field measurement, including its applications, advantages, and limitations.
Students will be able to develop and follow detailed written procedures for conducting ACFMT inspections, ensuring that all necessary steps are covered.
Students will become familiar with ACFMT equipment, including probes, detectors, and other accessories necessary for effective testing.
Students will learn the importance of proper calibration and how to perform it to ensure accurate and consistent results.
The course will provide guidance on setting up an ACFMT system, including probe selection, positioning, and other essential factors.
Requirements
No required class pre-requisites. However, if you wish to pursue the ASNT ET Level III Certification Exam, a minimal years of experience on subject matter is required depending on your educational qualifications.
Description
This introductory course offers students a comprehensive understanding of the Alternating Current Field Measurement Technique (ACFMT), a non-destructive testing method used to detect surface and near-surface defects in conductive materials. The curriculum covers key aspects of ACFMT, including equipment, probe selection, calibration, examination coverage, examination methods, and documentation. Students will also learn about the basic working principle of ACFMT.Course Objectives:Upon successful completion of this course, students will be able to:Understand the basic working principle of ACFMT and its role in non-destructive testing.Select suitable ACFMT equipment and probes for various testing applications.Calibrate ACFMT equipment and probes to ensure accurate measurements.Develop examination coverage strategies to optimize defect detection in conductive materials.Apply appropriate examination methods to detect surface and near-surface defects using ACFMT.Document examination results and create comprehensive reports in accordance with industry standards.By the end of this course, you will be well-versed in the theory, principles, and applications of Alternating Current Field Measurement Testing, allowing you to perform accurate and efficient inspections across a wide range of industries. Whether you are a technician, engineer, or manager, this comprehensive online course will equip you with the expertise needed to excel in the fast-paced world of non-destructive testing. Enroll today and start mastering ACFMT!Expert Instruction: Learn from seasoned professionals with years of experience in ACFMT and non-destructive testing, ensuring you receive up-to-date, practical knowledge.
Overview
Section 1: Introduction to Alternating Current Field Measurement Technique (ACFMT)
Lecture 1 Introduction to ACFMT
Section 2: T-1510 Scope
Lecture 2 T1510-Scope
Section 3: T-1520 General
Lecture 3 T-1520 General
Lecture 4 T-1521 Supplemental Requirements
Section 4: T-1522 Written Procedure Requirements
Lecture 5 T-1522 Written Procedure Requirements
Section 5: T-1530 Equipment
Lecture 6 T-1531 Instrument
Lecture 7 T-1532 Probes
Lecture 8 T-1533 Calibration Blocks
Section 6: T-1540 Miscellaneous Requirements
Lecture 9 T-1541 Surface Conditioning
Lecture 10 T-1542 Demagnetization
Lecture 11 T-1543 Identification of Weld Examination Areas
Section 7: T-1560 Calibration
Lecture 12 T-1561 General Requirements
Lecture 13 T-1562 Calibration
Lecture 14 T-1563 Performance Confirmation
Section 8: T-1570 Examination
Lecture 15 T-1571 General Examination Requirements
Lecture 16 T-1572 Examination Coverage & T-1573 Overlap
Lecture 17 T-1574 Interpretation
Section 9: T-1580 Evaluation
Lecture 18 T-1580 Evaluation
Section 10: T-1590 Documentation
Lecture 19 T-1590 Documentation
Section 11: ACFMT-Additional Videos
Lecture 20 Alternating Current Field Measurement Technique
Lecture 21 Alternating Current Field Measurement-Animation
Lecture 22 Offshore and Subsea ACFM
Lecture 23 Subsea ACFMT
Lecture 24 TSC ACFM Crack Detection and Sizing Solution
Lecture 25 TSC Subsea ACFM Explained real weld example
Lecture 26 Underwater ACFMT
Section 12: Bonus Section
Lecture 27 Bonus Lession
Professionals who are interested in getting the ASNT ET Level III Certification,NDT Managers / NDT Engineers / NDT Supervisors / NDT Inspectors / NDT Technicians,Experienced technicians, engineers, or inspectors who are seeking to advance their careers and take on leadership roles in the field of non-destructive testing. They are motivated to deepen their knowledge and skills in RFT to achieve the Level 3 certification and advance in their careers.,Individuals who already have a solid foundation in Alternating Current Field Measurement Testing (ACFMT) and are seeking to deepen their knowledge and skills in order to prepare for their ET Level 3 certification exam.
Course Information:
Udemy | English | 1h 41m | 961.56 MB
Created by: Chandrashekhar Thiramdas
You Can See More Courses in the Teaching & Academics >> Greetings from CourseDown.com