BGP and OSPF on FortiGate NSE7 and High level LABs
What you’ll learn
You will understand BGP and OSPF routing protocol in a simple way.
How to Configure BGP and OSPF in Fortigate based on GUI or CLI interface.
Explore how to install BGP and OSPF in large environments together, arrange the routing table, and distinguish between a routing table and a routing database.
It is recommended to those who work in large companies with multiple branches and bank networks.
Requirements
To benefit from this course, I recommend that you have a little experience with FortiGate.
Description
In this course we will learn to understand BGP and OSPF routing protocol and how to deploy BGP and OSPF in FortiGate devices and build real labs based on real environments in companies, Most useful in this course to build HQ and DR FortiGate LABs with branches and clarification how traffic Crossing through HQ and DR, solve the exercise when separating link branches with HQ and DR, and most importantly build a stable connection network in the routing table and check all predictable indicators of what is happening in the links between HQ and DR, the routing protocol No less important than protection procedures Make sure using network encrypted, use BPG and OSPF over IPsec VPN to ensure all traffic encrypted between branches to prevent sniffing attack.-The BGP course will learn BGP route selection, status and show traffic using Wireshark because the Wireshark program this important to know what is the problem when BGP status still down.-Using GNS3 will install FortiGate VM.-explaining route reflector and what is the important to using that feature to share network and advertise networks to all branches to create network full mesh-Additional Path feature integrate with Route Reflector and uses Access-List and Route-Map-Peer Group that feature the simplification when have many of peers and difficult to add peer separately in the HQ and DR
Overview
Section 1: BGP Introduction
Lecture 1 BGP Introduction
Lecture 2 BGP Route Selection
Lecture 3 BGP States
Lecture 4 Wireshark in BGP
Section 2: Prepare GNS3 emulation
Lecture 5 Install GNS3 and GNS3 VM
Lecture 6 Install FortiGate VM in GNS3
Section 3: Simple LAB BGP Advertised and receive route
Lecture 7 BGP Simple LAB
Section 4: Route Reflector
Lecture 8 Route Reflector-RR
Lecture 9 RR_LAB
Section 5: Additional Path & BGP ECMP
Lecture 10 Additional Path and LAB
Lecture 11 RR with Additional Path
Lecture 12 RR with Additional Path in LAB
Section 6: BGP Attribute & Status Code and Redistribution
Lecture 13 BGP Attribute & Status Code
Lecture 14 Redistribution and BGP attribute and status code practical
Section 7: Prefix-List, Access-List and Route-Map
Lecture 15 Prefix-List and Access-List
Lecture 16 Route-Map
Lecture 17 Route-Map LAB and Exercises
Section 8: BGP Peer-Group & BGP Authentication
Lecture 18 BGP Peer-Group and LAB
Section 9: BGP Timer & Reset BGP session
Lecture 19 BGP Timer & Reset session
Section 10: LAB for all previous subjects
Lecture 20 LAB Branches with HQ and DR
Section 11: BGP over IPsec (Overlay)
Lecture 21 LAB BGP over Overlay (Site to Site (VPN-MPLS connection))
Lecture 22 LAB BGP over Overlay (Dialup VPN (MPLS and LTE-4G connection))
Section 12: BGP Troublshoot
Lecture 23 BGP Troubleshoot and Monitor
It is recommended to those who work in large companies with multiple branches and bank networks.
Course Information:
Udemy | English | 6h 26m | 3.53 GB
Created by: Ahmad Mohammad Jaber Abu-Yahya
You Can See More Courses in the IT & Software >> Greetings from CourseDown.com