# STAAD Pro Professional CourseSteel Large Span Structures

Over 8.5 hours of Course Content with Practical Case studies of Steel Structure including Pushover Analysis

4.3/5

## STAAD Pro Professional CourseSteel Large Span Structures

### What you’ll learn

Design of Steel Truss Structures as per AISC 360
Wind Load Calculations as per ASCE 07-16 and IS 875-2015
Linear Buckling Analysis of I-Shape Columns , Girders etc.
Design of Pre Engineered Structure as per Indian and American Design Standards
Design of Lattice Truss Structures as per Indian Standards

### Requirements

Basic Knowledge of Civil and Structural Engineering

### Description

Design of Truss Structures as per AISC 360In this lecture series, first of all you shall learn the absolute basics of Introduction to Steel Truss Structures. Manual Design of Purlins and Sag Rods are explained in detail as per AISC 360. You shall learn how to model , analyze and design steel truss structures as per AISC 360. Linear Buckling Analysis of Structures Linear Buckling Analysis is a very interesting concept ,which form the basis of design of many types of structural elements. You shall learn how to do buckling analysis of Column Manually. After getting your concepts cleared , you shall learn how to perform buckling analysis of I shaped Steel Girders , I shape Columns and Cooling Tower. Design of Pre-Engineered Building as per Indian Standard IS800 Pre-Engineered Buildings are somewhat difficult to model and analyze. The Instructor explains the anatomy of PEB structures first. You shall learn how to model , analyze and design the structures. Wind load calculations is taught in great detail. Design of Lattice Steel Truss Structure as per Indian Design Standards This lecture series starts with Introduction to Lattice Steel Truss Structures.The modelling , analysis and design of Steel Truss Lattice Structures are taught with practical examples. Difference in behavior of Conventional PEB structure with Lattice Steel Truss Structures is taught in great detail. You shall learn how to read the design results and optimize the steel structures. Design of Pre-Engineered Building as per American Standard AISC 360 and ASCE 07 This is the only lecture series on the internet that shall explain you how to calculate the Wind loads as per American Standard ASCE07. The Portal frame analysis for the structure is performed as per AISC 360. The design of the Portal is done and the results are analyzed. Non-Linear Static Analysis of Steel Structures (Pushover Analysis)In this lecture series , Non-Linear Static Analysis of Steel Structure is done in the STAAD. The pushover analysis is taught in great detail in this lecture series. The modelling is done for a planar structure in STAAD. The pushover curved is generated and the results are ascertained.

### Overview

Section 1: Design of Steel Truss Structure as per AISC 360

Lecture 1 Introduction to Steel Truss Structures

Lecture 2 Manual Design of Purlins and Sag Rods for Wind Loads

Lecture 3 Modelling, Analysis and Design of Steel Truss in STAAD as per AISC 360

Section 2: Linear Buckling Analysis of Structures

Lecture 4 Introduction to Linear Buckling Analysis

Lecture 5 Perform Buckling Analysis for I Shape Column

Lecture 6 Perform Buckling Analysis for I Shaped Steel Girder

Lecture 7 Perform Buckling Analysis of a Cooling Tower (Theoretical Example)

Section 3: Design of Pre-Engineered Buildings(PEB) as per Indian Standard IS 800

Lecture 8 Introduction to Pre-Engineered Buildings (PEB)

Lecture 9 Modelling of PEB Shed and Assigning Properties

Lecture 10 Define Load Cases and Combinations

Lecture 11 Calculation and Assignemnt of Dead and Live Loads as per IS 875 and NBC 2016

Lecture 12 Assignment of Wind Loads on PEB Shed as per the Indian Standards

Lecture 13 Assigning Analysis and Design Parameters with Extracting Design Results

Section 4: Design of Lattice Steel Structures as per Indian Design Standards

Lecture 14 Introduction to Lattice Steel Truss Structures

Lecture 15 Practical Reference for a Lattice Steel Truss Structure

Lecture 16 Modelling , Analysis and Design of Lattice Steel Truss Structure

Lecture 17 Reading Design Results and Optimising the Steel Structure

Section 5: Design of PEB Portal as per AISC 360 and ASCE 07

Lecture 18 Detailed Explaination of Wind Loads as per ASCE 07-16

Lecture 19 Modelling , Analysis and Design of Portal Frame as per AISC 360 and ASCE07-16

Lecture 20 Introduction to Non Linear Static Analysis i.e.Pushover Analysis

Section 6: Non-Linear Static Analysis of Steel Structures (Pushover Analysis) in STAAD.Pro

Lecture 21 Introduction to Pushover Analysis in STAAD.Pro

Lecture 22 Perform Pushover Analysis for a Steel Frame in STAAD.Pro

Civil Engineers,Structural Engineers,Architects,Civil Engineering Students,Steel Fabricators

#### Course Information:

Udemy | English | 8h 43m | 5.22 GB
Created by: MileHigh Structures Academy & Consulting

You Can See More Courses in the Design >> Greetings from CourseDown.com

Scroll to Top